Polyflex Heat Transfer Film Process, Step By Step!

Polyflex Heat Transfer Film
After successfully installing MT-365 Cutting Plotter and can apply with CorelDraw, Also read : MT-365 Cutting Plotter, Installing The Driver And Applications With CorelDraw.
Now I will show you how these tools work, I created an experiment that is to apply a logo on to t-shirt, the material used to the logo screen printing is named Polyflex.
Little information about the Polyflex, Polyflex is the type of material that is commonly used for screen printing t-shirts, type of material is very flexible and can stick to the polyester or cotton cloth by using a heat press machine.

Step #1 Convert to curve and mirroring the logos design in CorelDraw, and setting the outline width to hairline.
Step #2 Split by colour based on main design.
Step #3 Prepare the Polyflex, cut the Polyflex adjust to the width of each section.
Step #4, Cutting with cutting plotter, set the Polyflex at the cutting plotter and print design in CorelDraw. Next, remove parts that are not needed in the Polyflex film.
Step #5, Transfer the polyflex film onto t-shir with heat press machine, setting temperature to 130 degrees and press for 20 seconds then remove the film from t-shirt

More detail see the following video :

Related Post